Celebrating 35 years

Need a quote?  Click here >

 

Telephone Line Simulators

RingMaster StandardProduct Code:

RINGMASTER STD is the simplest device and is suitable for use with most telephone equipment. RingMaster STD allows for one attached device to ring RingMaster Stdthe other device by simply lifting either receiver (ie going 'off hook').  As soon as the first device goes 'off hook', it will ring the other device with the standard AUSTRALIAN RING until the other device answers.  Once the second device answers, RingMaster STD will provide both devices with a 'noise free' telephone line connection, so that they can communicate.

Connection will cease as soon as one devices 'hangs up'.  Operation of this product is fully bi-directional. RINGMASTER STD does not provide 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone.  This means that RingMaster STD cannot be used with equipment (such as a modem) that requires 'dial tone' before they will dial. You will need to use our Ring Master - Pro, Ring Master - CLI or Ring Master - International devices with this type of equipment.

 

IQ333SRingMaster User Guide

    


RingMaster CLIProduct Code:

RINGMASTER CLI provides all of the features and facilities of our RingMaster CLIRingMaster PRO device, and in addition also provides for Calling Line Identification (CLI) data transmission, which in Australia is called Calling Number Display (CND).

RINGMASTER CLI has been pre-programmed with 10 separate CLI data transmissions, consisting of a range of Telephone Number, Date and Time data that can be used to comprehensively test the detection and display facilities of equipment which supports this service.  One CLI pattern also provides Alphanumeric output, which can be used to test equipment that also supports NAME data that may be sent with future CLI transmissions. RingMaster CLI will also allow you to enter and transmit your own entered telephone number.

RINGMASTER CLI data is transmitted whenever a second digit is dialled (digits 0-9). However, if only 1 digit is dialled, RingMaster CLI will not generate CLI data on this call, but will simply initiate a call with the appropriate Ring Output required (this product also provides all 'Distinctive Rings' that are used in Australia).
 

IQ333SRingMaster User Guide


RingMaster ProProduct Code:

RINGMASTER PRO is a sophisticated device that accurately emulates all of the Australian telephone line characteristics, including all 'Call Progress RingMaster ProTones'. RingMaster PRO operates the same as a telephone exchange.  Therefore when the first devices goes 'off hook', it will provide 'Australian Dial Tone'. To initiate a call, you should then press 0, which will then cause the unit to generate standard AUSTRALIAN RING until the other device answers.  Once the second device answers, RingMaster PRO will provide both devices with a 'noise free' telephone line connection, so that they can communicate. Connection will cease as soon as one device 'hangs up', at which time it will then generate 'Australian Hang Up Tone'.  If the other device is already 'off hook' when you attempt to make a call, RingMaster PRO will generate 'Australian Busy Tone'. Operation of this product is fully bi-directional.

RINGMASTER PRO provides all 'Call Progress Tones', such as Dial Tone, Busy Tone and Hang Up tone.  This means that RingMaster PRO can be used with equipment (such as a modem) that requires 'dial tone' before they will dial.

RINGMASTER PRO also provides all 'Distinctive Rings' that are used in Australia, such as FaxStream Duet ring, Multiple Number ring, Diverted Call ring and all of the other Distinctive Ring patterns that have been defined for eventual use in Australia.  The 7 Distinctive Ring patterns are initiated by dialling 1 through to 7, instead of the normal 0.

 

IQ333SRing Master User Guide


RingMaster InternationalProduct Code:

RINGMASTER INTERNATIONAL emulates the telephone line characteristics RingMaster Internationalof over 20 separate countries.  Country specific Ring Output, Dial Tone, Busy Tone and Hang Up tone are provided. Operation is fully bi-directional, with line connection at 24VDC (as provided by most PABX devices).

Specific Country emulation is selected by setting the position of 4 dip switches, located on the underside of the unit.  Changing emulation from one country to another can be achieved in seconds.

 

IQ333SRing Master User Guide