• Built-in headset support - headset amplifiers are not required, providing a considerable cost saving when using a headset
• Handsfree operation for conference calling
• 10 one touch memory keys
• 5 Year memory retention
• Adjustable headset/handset & handsfree hearing level with slider volume control
• Headset microphone level adjustment
• Headset Cable Polarity Switch
• Redial and Pause functions
• Built-in message waiting and super bright LED ringer indicator lamp
• Built-in trainee/supervisor double jacking mode
• Mute key & Indicator
• Silent Ringing allows ringing to be heard in headset only
• Large In-use indicator light to show when user is on a call
• Mid-call mode support (change between Headset and Handset during a call)
• Ringer volume and pitch controls
• Noise Cancelling handset microphone
• Hearing Aid compatible

Primarily designed for Noisy Environs
normal loud ringing is drowned or is
difficult to hear. The unit gives excellent
"bounce around" from the strobe
light. Easy to install - mount on wall,
plug into power outlet and then plug into
Telephone Line.
During incoming ring, the unit produces
a sound and also flashes a strobe light.
The sound type is adjustable across 32
settings using internal adjustments.
Suitable for direct Telephone Lines and
Analog Phone ports of PABX Systems.

• Fly Lead with BT Plug Supplied as Standard
• 22Vdc - 240Vac Power Adaptor Included
• Wall Mountable
• Amber or (optional Clear, Blue, Green, Red available)
• 2 Part Unit
• Strobe Output
• Sound Output - 1 of 32 Tones
• Volume Control
• Very High Light Output
• Telephone Cord - 2 metres
• 22Vdc plug pack

Flashes an incandescent lamp in sequence with incoming telephone ring note: not suitable for use with Fluorescent lamps

• Easily connected to a standard telephone socket.
• Selector switch allows the lamp to be set to normally "on" or normally "off" for day or night operation
• Indicator Lamp - dual colour to indicate mode and operation
• Activated by incoming ring Can also be activated by signals 4 to 24Vac/dc 1mA to 10mA (e.g. Door Bell Button)

Note: not suitable for use with Fluorescent lamps

Specifications:

• AC ring Detection 40 to 120Vac RMS at 14 to 55Hz (RJ pins 3 & 4 centre pins)
• REN: less than 0.2
• DC and AC signal Detection 4 to 24Vac/dc 1mA to 10mA (RJ pins 2 & 5)
• Power Rating:
• Nominal rating 500W / 2A max rating

Note: The AC and DC control inputs can NOT be used at the same time